Forever Metals understands that our customers are busy and may not get out of the house to get sized correctly. This being said, we would like to offer our customers a free sizing tool to accurately size their fingers without ever leaving the house. We thank you for your business!

Paper Ring Sizer

The most accurate way of measuring your ring size is by visiting a few reputable jewelers in your area. Jewelers use graduated rings at whole, half, and quarter ring sizes to measure the diameter of your ring finger.

Many have found that trying on wedding bands in different widths is the easiest way to determine their exact ring size. Another way of measuring your ring size is to order a complimentary plastic ring sizer over the internet. Many of the larger jewelers offer complimentary ring sizers. Both of those options may take time, and for an immediate answer you can download and print the paper ring sizers below or the picture above. Simply print and follow the instructions for immediate results.

ABOVE PICTURE: Make sure that your printer is set to 100% photo print not reducing the print size in any way. You can verify that the sizer printed correctly by measuring it with a ruler; it should measure from left to right: 3 3/8 inches. Once you have printed the sizer, you may cut it out and use it or try the following directions to find your ring size:

• Wrap a piece of loose string around your finger. Be sure to allow for the size of your knuckle.
• With a pen, mark the point on the string where the end meets.
• Using the chart, place the end of the string on the left hand line next to the letter “A” and stretch the string along the sizer toward the numbers.
• The pen mark on your string should line up with a number to indicate your ring size.

Ring Sizer 1 Acrobat Download | Ring Sizer 2 Acrobat Download

Whole and Half Sizes

Forever Metals stocks whole and half sizes only ideally sizing a comfortable fit, tight enough to prevent the ring from accidentally falling off. If you have oddly shaped thick knuckles with skinny fingers, you may be interested in ordering a custom size 1/4 or 3/4 fit.

Forever Metals recommends for fitting rings, be sure that the pertaining ring size is a comfortable fit for the particular width you are interested in purchasing. Rings wider then 8mm tend to cover a lot more circumference of your finger and ring sizes may fluctuate 1/4 to a 1/2 ring size.

Comfort Fit is the only type of fitting we offer. All our rings are made with the inside edges perfectly shaped for maximum comfort fit against the webbing of your finger and the sides of our rings are rounded not flat or sharp. The comfort fit helps in sliding the tightest of fits off of swollen and broken fingers and may tend to provide a slightly looser fit.

Rest assured our rings will not rock on your finger, nor will they sit too high where it could snag or dig into your finger. There have never been complaints as to how the fit feels.

Finger size changes with temperature, age, and different types of foods.

Whether you have been sleeping for 12 hours without blood circulation to your hands or you have been swimming a marathon for 12 straight days, Forever Metals does not recommend the next size smaller or larger for any reason. Forever Metals recommends multiple sizing techniques and readings from two or more sources so one jeweler’s interpretations do not mislead your purchase for a snug fit.

Last Updated: October 6, 2018