|
The above ring sizer may not be the most
accurate guide to determining ring size, however it is most certainly the
quickest way to approximate your ring size. In order to print the ring sizer on
this page, be sure that your printer is set to 100% photo print not reducing the
print size in any way. You can verify that the sizer printed correctly by
measuring it with a ruler; it should measure from left to right: 3 3/8 inches.
Once you have printed the sizer, you may cut
it out and use it or try the following directions to find your ring size:
-
Wrap a piece of loose string around your
finger. Be sure to allow for the size of your knuckle.
With a pen, mark the point on the string
where the end meets.
Using the chart, place the end of the string
on the left hand line next to the letter "A" and stretch the string along the
sizer toward the numbers.
The pen mark on your string should line up
with a number to indicate your ring size.
Click
Here for a second ring sizer (Adobe Acrobat PDF format).
Click
Here for a third ring sizer (Adobe Acrobat PDF format).
|
